Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Tenmars TM-183
Summary of Contents for Tenmars TM-183
- Page 1 Temperature / Humidity Meter TM-183 User’s Manual...
- Page 2 CONTENTS PREFACE ........................1 CHARACTERISTICS ....................1 SPECIFICATIONS....................... 1 General Specifications..................1 Electrical Specification: (Temperature: 25°C, Humidity: <90% RH) ...... 1 Accuracy: ......................1 OPERATING INSTRUCTIONS ................... 2 LCD Display Functions:..................2 Button function: ....................2 Switch Temperature Scale (°C/°F/MEM) .............. 2 Data Hold “...
- Page 3 1 PREFACE Thank you for your patronage Please read these operating instructions carefully so that you may correctly operate the Temperature / Humidity Meter, allowing it to perform all its intended functions at optimum level. The Temperature /Humidity Meter uses a highly accurate sensor chip to measure relative humidity and temperature.
- Page 4 4 OPERATING INSTRUCTIONS 4.1 LCD Display Functions: Data Hold MAX Data Hold MIN Data Hold AVG Reading Primary Display °C Temperaure Scale °F Temperture Scale WET-BULB DEW-POINT 10. Relative Humidity °C Temperature Scale 12. °F Temperature Scale 13. Minute/Second 14. Day/Hour 15.
- Page 5 4.5 MAX/MIN/AVG “ ”Button At normal temperature and humidity test mode, pressing the “ ” button over “1 “second to enter MAX/MIN/AVG record mode, and start to count time, LCD primary display shows the current testing temperature, secondary display shows the record time. Press “...
- Page 6 4.7 Power “ ”Button: Press the” ” button to power on the thermometer. Press the ” “button again to power the meter off. The meter automatically powers off after 15 minutes of inactivity. Power button uses as the combination button to realize other functions while the thermometer on, the power off function inactivity while other button and Power button pressing at the same time, the thermometer processes combination button function.
- Page 7 4.11 Alarm Setting Way When there is an audible alarm, and the temperature exceeds the preset limit, the “°C” or “°F” sign on the LCD flashes on and off. If the humidity exceeds the preset limit, the “%RH” sign on the LCD flashes on and off. To cancel the audible alarm, please press the ”...
- Page 8 6 Measurement Method ● Power on the Temperature / Humidity Meter. If you wish to disable the auto-power off function, please refer to enable or disable Auto-Power Off Function statement. ● Place the Temperature / Humidity Meter at a location where measurement is to be made.
Need help?
Do you have a question about the TM-183 and is the answer not in the manual?
Questions and answers