Operation; Control Panel Description - edenox PL-211 Manual Instructions

3. OPERATION

3.1 Control panel description.

3.2 Machine settings and programs.
3.1 CONTROL PANEL DESCRIPTION
The appliance is turned on by pressing the start-up switch located on the footshields. The switch will light up
when pressed. (Except for the PC-XXX C, PC-R-XXX C models)
3.2 MACHINE SETTINGS AND PROGRAMS
INSTALLED OPERATION SYSTEMS:
The illuminated gantries (PL) include high performance and low consumption LED.
The heated gantries provide light and heat by means of ECO halogen lamps (lower consumption than standard
lamps) protected with glass.
Footshields with light and heat with ceramic infrared glasses, provide more intense and concentrated heat.
For table of parameters and any other information, follow the instructions indicated at the electronic
controller manual, also supplied.
5 edenox.com
ENGLISH