P And R Connectors; Figure 4-1 12 V In Connector; Figure 4-2 P And R Connector; Table 7 Pinout For The 12 V In Connector - Olympus TRPP 5810 User Manual

DMTA-20070-01EN, Rev. A, October 2014
Pin
1
2
4.3.2

P and R Connectors

The P and R connectors on the TRPP 5810 unit (see Figure 4-2 on page 28) are used for
pulser and receiver connections, coming from or going to the TOFD probes and an
acquisition unit.
Description
Coaxial receptacle
Manufacturer, number
LEMO, EPS.00.250.NTN
Olympus, 21AB0056
Suggested cable connector
LEMO, FFC.00.250.CTAC31
Equivalent: W.W. Fischer, S.101.A004/3.0
Olympus, 21AB0016
28 Chapter 4

Figure 4-1 12 V IN connector

Table 7 Pinout for the 12 V IN connector

I/O Signal
Input 12 VDC
N/A GND

Figure 4-2 P and R connector

1
2
Description
9 VDC to 14 VDC input (12 VDC
nominal), 250 mA max.
Ground