Table of Contents
Advertisement
DMTA-20070-01EN, Rev. A, October 2014
1.2
Front Panel of the TRPP 5810 Unit
The connectors for the TOFD probes are located on the front panel of the unit (see
Figure 1-2 on page 16).
R1 IN and R2 IN
These LEMO 00 series connectors are used to connect conventional ultrasonic-
receiver probes to the TRPP 5810 unit (receivers).
P1 OUT and P2 OUT
These LEMO 00 series connectors are used to connect conventional ultrasonic-
pulser probes to the TRPP 5810 unit (pulsers).
1.3
Back Panel of the TRPP 5810 Unit
The acquisition unit interfaces with the TRPP 5810 thru connections on the back panel
of the TRPP 5810 (see Figure 1-3 on page 17). The POWER (on) LED indicator and
power connector are also located here.
16
Chapter 1
Figure 1-2 Front panel of the TRPP 5810 unit
Advertisement
Chapters
Table of Contents
