1. Overview of the Product
This section describes the functional and physical characteristics of the TRPP 5810
remote pulser/preamplifier.
1.1
System Configuration
The following block diagram (see Figure 1-1 on page 15) illustrates the system
configuration of the TRPP 5810 remote pulser/preamplifier in a typical TOFD
inspection application.
Acquisition unit
Acquisition Unit
Transmitter
Transmitter
outputs
Outputs
Receiver
Receiver
inputs
Inputs
12 V output
12 V Output
With the TRPP 5810 unit, remote inspection can be performed with two pairs of TOFD
probes. The pulser side converts the input signal to 200 V pulse, while the receiver
side provides 40 dB of preamplification.
Model 5810
Model 5810
pulser
Pulser
Inputs
Outputs
Inputs
Outputs
Preamplifier
Preamplifier
Outputs
Inputs
Outputs
Inputs
Power input
Power Input
Figure 1-1 System block diagram
DMTA-20070-01EN, Rev. A, October 2014
Probes
Probes
Pulser
Receiver
Pulser
Receiver
Overview of the Product
15