Introduction; Unit Features - Olympus TRPP 5810 User Manual

Introduction

The TRPP 5810 is a high-performance remote pulser/preamplifier designed mainly for
TOFD inspection solutions with Olympus scanners and PipeWIZARD systems.
The TRPP 5810 remote pulser/preamplifier supports two UT channels in order to
inspect simultaneously with two pairs of TOFD probes. It provides an optimum
signal-to-noise ratio for TOFD inspection by using a 40 dB preamplifier combined
with a remote high-voltage (200 V) pulse repeater in a single, small enclosure.
In order to preserve the optimum signal-to-noise ratio, the pulse-echo mode of probe
amplification is not available for this product.
The TRPP 5810 signal conditioning device allows the acquisition unit of a TOFD
inspection system to be located up to 50 m away from the probes.

Unit Features

The TRPP 5810 remote pulser/preamplifier offers the following features:
• General Features
— Optimum signal-to-noise ratio for remote TOFD inspections
— Two UT channels using two pairs of TOFD probes
— 200 V pulsers
— 40 dB preamplification
— Small form factor
— Designed for IP66 protection
— External power supply
DMTA-20070-01EN, Rev. A, October 2014
Introduction 13