Connector References; 12 V In Connector - Olympus TRPP 5810 User Manual

Minimum pulse width
Maximum pulse width
Repeated pulse width error
Maximum pulse repetition
freq. (PRF)
4.3

Connector References

This section provides the following details for the 12 V IN, P, and R connectors on the
TRPP 5810's front and back panels: a brief description, the manufacturer number, the
number of the corresponding cable connector, an illustration, and a pinout table.
4.3.1

12 V IN Connector

The 12 V IN connector (see Figure 4-1 on page 28) is used to supply power to the
TRPP 5810 unit.
Description
Receptacle with 2 female contacts
Manufacturer, number
W.W. Fischer Inc., D.103.A051-130
Olympus, 21AB0133
Suggested cable connector
W.W. Fischer Inc., S.103.A051-60/6.2-S
Olympus, 21AB0132
Table 6 Pulser specifications (continued)
Parameter
45 ns ±5 ns
500 ns ±50 ns
±10 % for pulse width >50 ns, else ±5 ns
with −50 V min. input trig. voltage
5 kHz for 100 ns pulse width, both channels
10 kHz for 100 ns pulse width, single
channel
20 kHz for 50 ns pulse width, single
channel (0.1 % total maximum duty cycle)
DMTA-20070-01EN, Rev. A, October 2014
Value
Specifications 27