Safety Tips; Care And Maintenance - Hamilton Beach OG02 Assembly And Operation Manual

POST-ASSEMBLY

SAFETY TIPS:

1. Always check for leaks after every Natural Gas Hose change.
2. Always check for leaks before each use.
3. Use long barbeque tools to avoid burns.
4. Check all gas supply fittings for leaks before each use. It is handy to keep a spray bottle
of soapy water near the shut-off valve of the gas supply line. Spray all of the fittings.
Bubbles indicate leaks.
5. For any other problems, see "Troubleshooting" or contact Consumer Affairs.
MAINTENANCE:
1. Keep the grill area clear and free from combustible materials, gasoline, and other
flammable vapors and liquids.
2. Keep the holes in the three sides of the cart clear and free from debris, ensuring the flow
of combustion and ventilation air is unobstructed.
3. Visually check burner flames as follows:
• Remove cooking grids and flame tamers.
• Light burners.
• Turn knobs from the highest to the lowest possible setting and check the flame status.
The flame in the lowest position should be smaller than in the highest position, as in the
figure shown below.
• Always check flame before each use. See "Troubleshooting" if any abnormal status is
found.
4. Visit our website, www.hamiltonbeach.com, or call Consumer Affairs at 1-800-267-2826 for
replacement parts.
38
SAFETY TIPS

CARE AND MAINTENANCE

Highest
Lowest