Air vent pipe
1
Air vent hose
2
Vacuum hose
3
A.C. magneto lead
4
Sidestand switch
5
Thermo switch lead
6
Throttle cable (accelerate side)
7
Stay 1
8
CABLE ROUTING
A Route the wireharness through the frame guide.
At this time, place the protector (for the handle cov-
er inner side) on the bottom side.
B Fasten the rear brake hose and vacuum hose with
a plastic clamp.
The fastening position is 0 to 5 m from edge of the
frame bracket.
C Pass the wireharness by the outside of the rear
footrest mounting boss.
(When mounting the rear footrest, do not catch or
pinch the A.C. magneto lead in the bracket.)
–9–
SPEC