Yamaha XP500 2002 Supplementary Service Manual page 10

J Connect the taped headlight lead coupler to the
headlight's white marked side (left side: high beam
side).
(For UK, OCE the right side is the high beam side.)
K Fasten the headlight sub-harness. (left and right)
(For EUR)
L Connect the turn signal light. (left and right)
M Securely fasten the wire strap to the front cowling
hook to prevent it from being pulled out by the
headlight assembly. (left and right)
N Route the horn lead through the wire guide.
O After passing the horn lead through the clamp,
crimp the clamp.
P Wiring is unnecessary. (left and right) (for OCE)
CABLE ROUTING
–4–
SPEC