Field Wireless Media Converter Read Me First IM 01W02D02-11EN This document specifies the important information to use this product correctly and safely for YFGW610 Field Wireless Media Converter. Before use the product, be sure to read this document first. Contents Introduction ....................2 Safety Precautions ..................3...
<Read Me First> Introduction This manual (IM 01W02D02-11EN) describes the safety precautions, explosion protected type specifications for the YFGW610. There are three documents including this one for the YFGW610 listed below. Read them along with this manual. Document No. Document name...
If any protection or safety circuit is required for the system controlled by the product or for the product itself, prepares it separately. Be sure to use the spare parts approved by Yokogawa Electric Corporation (hereafter simply referred to as Yokogawa) when replacing parts or consumables.
Page 4
If these instructions are not heeded, the protection provided by this product may be impaired. In this case, Yokogawa cannot guarantee that this product can be safely operated. Please pay special attention to the following points: (a) Installation •...
Page 5
If you need to repair or modification, please contact the nearest Yokogawa office. (f) Modification • Yokogawa will not be liable for malfunctions or damage resulting from any modification made to this instrument by the customer. (g) Product Disposal •...
Page 6
Yokogawa shall have neither liability nor responsibility to any person or entity with respect to any direct or indirect loss or damage arising from using the product or any defect of the product that Yokogawa can not predict in advance.
Page 7
To connect the ground cable to the FG terminal, use a ring tongue terminal for M4 with an insulation sleeve. Secure the M4 screws at a tightening torque of 1.2 to 1.5 Nm. For grounding of YFGW610, see “B4.3 Grounding” of the YFGW610 user’s manual (IM 01W02D02-01EN). ALSO IM 01W02D02-11EN...
*1: To be compliant with these standards, the YFGW610 hardware needs to be installed in a lockable metal cabinet. *2: To be compliant with these standards, the YFGW610 hardware needs to be installed in a lockable metal cabinet of IP54 or higher protection rating.
Page 10
<Read Me First> ATEX Caution for ATEX Type n declaration (1) Technical Data Note 1. Model YFGW610 Field Wireless Media Converter with optional code /KN27 is applicable for use in hazardous area. • Applicable Standards: EN IEC 60079-0, EN 60079-15 • Marking: II 3 G Ex nA IIC T4 Gc X •...
Page 11
<Read Me First> (3) Installation WARNING • The equipment shall be installed and used within their ratings. • All equipment and wiring in hazardous areas shall be installed in accordance with EN 60079-14 and related local electrical codes and the installation shall also comply with the appropriate requirements for non-hazardous areas.
Page 12
(5) Maintenance and Repair WARNING • A modification of the equipment would no longer comply with the construction described in the certificate documentation. • Only personnel authorized by Yokogawa Electric Corporation can repair the equipment. (6) Name Plate • Main Name plate MODEL: Specified model code.
Composition of User’s Manual This chapter explains the composition of User’s Manual. The following printed user’s manuals are attached to YFGW610 hardware. • IM 01W02D02-11EN: YFGW610 Field Wireless Media Converter Read Me First • IM 01W02D02-01EN: YFGW610 Field Wireless Media Converter IM 01W02D02-11EN...
<Read Me First> Information of User’s Manual Revision Material Name: YFGW610 Field Wireless Media Converter Read Me First Material Number: IM 01W02D02-11EN Edition Date Page Revised Item 1st Edition May 2014 New Issue 2nd Edition March 2016 Add document list Add “Safe Use of This Product”...
Need help?
Do you have a question about the YFGW610 and is the answer not in the manual?
Questions and answers