Switching To Radio Mode; Switching The Rds Function On/Off; Selecting The Waveband / Memory Bank; Tuning Into A Station - Blaupunkt Acapulco MP52 Operating Instructions Manual

Switching to radio mode

If you are in CD, CD changer/Compact
Drive MP3 or AUX mode,
press the FM TS button 5 for FM
radio mode.
or
press the AM button ? for AM ra-
dio mode.
Switching the RDS function on/
off
To use the RDS functions, press
the RDS button 4.
The RDS function is active when RDS
lights up in the display with a symbol.
Selecting the waveband /
memory bank
This unit can receive programmes
broadcast over the FM and AM wave-
bands. There are three memory banks
(FM1, FM2 and FMT) for the FM wave-
band and two memory banks (AM and
AMT) for the AM waveband.
Six stations can be stored in each mem-
ory bank.
To switch between the FM memory
banks,
briefly press the FM TS button 5
repeatedly until the required mem-
ory bank appears in the display.
To switch between the AM memory
banks,
briefly press the AM button ? re-
peatedly until the required memory
bank appears in the display.

Tuning into a station

There are various ways of tuning into a
station.
Automatic seek tuning
Press the or
The unit tunes into the next receivable
station.
Tuning into stations manually
You can also tune into stations manual-
ly.
Press the or
Note:
You can only tune into stations manual-
ly on the FM waveband if the RDS and
PTY functions are deactivated.
Setting the sensitivity of station
seek tuning
You can choose whether to only tune
into stations with a strong reception or
to also tune into those with a weak re-
ception.
Press the MENU button 8.
Keep pressing the
til "SENS" appears in the display.
"SENS 6" means that the tuner is set to
the highest sensitivity setting. "SENS 1"
is the lowest setting.
Set the required sensitivity using
button :.
the or
When you have finished making your
changes,
press the MENU button 8 or OK
;.
RADIO MODE
button :.
button :.
button : un-
11