Table of Contents
Advertisement
EXTERNAL AUDIO SOURCES
External audio sources
In addition to the CD changer, you can
also connect up a different external au-
dio source with a line output. Such
sources can be, for example, portable
CD players, minidisc players or MP3
players.
If there is no CD changer connected to
your unit, two external audio sources
can be hooked up.
The AUX output has to be switched on
in the install menu.
To connect up an external audio source,
you will need an adapter cable, obtain-
able from any authorised Blaupunkt
dealer.
Switching the AUX input on/off
Press the MENU button 8.
"MENU" appears on the display.
button : repeatedly
Press the
until "AUX-IN-1 OFF" or "AUX-IN-1
ON" appears on the display.
For the second AUX input, a "2" will be
displayed instead of a "1". If a CD chang-
er is connected, only input "2" will be
available.
Press the
or
switch AUX on or off.
Press the MENU button 8 or OK
; once you have completed the
setting.
Note:
When the AUX input is switched on, it
can be selected using the SRC button
@.
30
button : to
TECHNICAL DATA
Technical data
Amplifier
Output power:
Tuner
Frequency ranges:
FM :
AM :
FM transmission range:
CD
Transmission range:
Pre-amp output
4 channels:
Input sensitivity:
AUX 1 input
AUX 2 input
Tel/Navi reception : 10 V / 560 Ω
Subject to changes!
4 x 26 watts sine
in accordance
with DIN 45 324 at
14.4V,
4 x 50 watts max.
power
87.5 - 107,9 MHz
530 - 1 710 kHz
20 - 16 000 Hz
15 - 20 000 Hz
4 V
: 2 V / 6 kΩ
: 775 mV / 10 kΩ
Advertisement
Table of Contents
