Battery Compartment; Serial Port - Blackberry 950 Installation And User Manual

4 Introduction – Handheld components

Battery compartment

The handheld operates on one AA alkaline battery located in the
battery compartment at the back of the handheld. See page 18 for
information regarding battery life and replacement.
Holster (belt clip)
A holster, equipped with a belt clip, accompanies the handheld.
While in the holster, the handheld is protected and wearable. You
can choose different forms of message notification based on
whether the handheld is in or out of the holster.
When you receive a new message and remove the handheld from
the holster within five seconds, notification (beeping and/or
vibrating) stops and the most recently received message will be
open. If you pull the handheld out of the holster and quickly
replace it, notification stops but the message will remain marked
unread. See page 23 for information on setting message notification
options.
Cradle
Once the BlackBerry Desktop Software has been installed on your
computer, use the docking cradle to connect the handheld to your
computer for backing-up and transferring handheld information.
See the 'BlackBerry Desktop Software' chapter of this Guide for
more information on the cradle and the capabilities of the
BlackBerry Desktop Software.

Serial port

The serial port on the bottom of the handheld fits into the prongs of
the docking cradle. When the cradle cable is connected to the serial
port on the back of your PC, you're ready to connect to the
BlackBerry Internet Edition – Installation & User's Guide