Ignore Fatal Error Mode (Not Available To Users) - Oki IP-6620 Maintenance Manual

3.5.4

Ignore fatal error mode (Not available to users)

This mode is used to enable panel operation even when a fatal error has occurred.
When the printer is started in this mode, the password entry screen for the maintenance mode is
displayed.
MAINTENANCE MODE
ENTER PASSWORD
With a password for the maintenance mode, special maintenance mode, production mode, or
engineering mode entered, the printer starts and enters the corresponding mode in the offline
state.
This mode is used to:
- Clear errors that have been saved for a long time
- Initialize the parameter
- Check the monitor
- Perform an online update
- Check the version with the carriage fixed
Below are the ignore fatal mode operations, i.e., this mode:
- lasts until the printer is shut down.
- prevents the printer from going online.
- disables error detection (errors are not displayed).
- disables carriage functions such as printing and cleaning.
- disables update of the carriage management time.
OKI Data Infotech Corporation CONFIDENTIAL
Chapter 3 Maintenance Mode Functions and Operations
3-99