Oki IP-6620 Maintenance Manual page 77

(2) MEDIA HEATER SET.
(a) STANDBY TEMP
This menu is used to configure the standby temperature.
Press the MENU button, select SETTING with the Up and Down buttons, and then press the OK
button.
MENU
 SETTING
Select MEDIA HEATER SET. with the Up and Down buttons, and then press the OK button.
>SETTING
 MEDIA HEATER SET.
Set the standby temperature for the preheater and the printheater.
Fahrenheit
>>>STANDBY TEMP
 XXYY ºC
YY: Standby temperature
XXX: Current setting
YYY: Setting after change
Unit: °C (Celsius degree) or °F (Fahrenheit degree)
Setting range: 15 to 40 for Celsius temperature or 59 to 104 for Fahrenheit temperature
OKI Data Infotech Corporation CONFIDENTIAL
Chapter 3 Maintenance Mode Functions and Operations
◎
◎
Celsius
>>>STANDBY TEMP
 XXYY ºF
◎ ◎
3-37