Oki IP-6620 Maintenance Manual page 99

(5) EDGE SENSOR ADJUST (displayed in maintenance mode only)
This menu is used to print the edge sensor position adjustment pattern and to set adjustment
values for the edge sensor and top and side positions.
(a) PRINT PATTERN
Select EDGE SENSOR ADJUST with the Up and Down buttons, and then press the OK button.
>MECHANICAL ADJUST
 EDGE SENSOR ADJUST
Select PRINT PATTERN with the Up and Down buttons, and then press the OK button.
>>EDGE SENSOR ADJUST
 PRINT PATTERN
Press the OK button to display the print confirmation screen, then press the OK button again to
start printing.
>>EDGE SENSOR ADJUST
EXECUTE OK?
Press the OK button to start printing.
You may press the CANCEL button to interrupt the printing.
>>EDGE SENSOR ADJUST
EXECUTING...
OKI Data Infotech Corporation CONFIDENTIAL
Chapter 3 Maintenance Mode Functions and Operations
◎
◎
◎
3-59