Advertisement
INSTALLATION
1
2
10
12
21
22
23
24
25
26
14
15
20
1332564-2A-B
How to Install the Diverter Body
3
Pre-install the screws(10) into the screw
4
holes of the threaded ring(9). Install the
threaded ring, steel washer(8) and fiber
washer(7) on the shank(11). From
underside of the bathtub, install the diverter
5
assembly(12) into the mounting hole.
6
Put the O-ring(6) into the groove of the
nut(5). Tighten the nut onto the shank from
upside of the bathtub. Secure the diverter
assembly by tightening the screws(10).
7
8
NOTE: The end with check valve(13) in
9
diverter is connected to shower hose.
11
13
Press the handle kit(3) onto the nut. Position
the handle base(4) as shown. Tighten the
screw(2) by hex wrench(1).
How to Install the Handshower
Pre-install the screws(19) into the screw
holes of the threaded ring(20). Install the
threaded ring, steel washer(18) and fiber
washer(17) on the shank(16). From
underside of the bathtub, install the shank
into the mounting hole as shown.
Put the O-ring(15) into the groove of the
escutcheon(14). Tighten the escutcheon
with O-ring on the shank. Tighten the
screws(19) firmly.
Put the washer(25) into the shower hose
(26, length: 2000mm). Connect the shower
hose to the elbow assembly(24) firstly.
Then slide the shower hose through the
escutcheon and shank.
16
17
18
Put the screen washer(23) into the elbow
19
assembly. Put the restrictor(22) into the
handshower(21) if needed. Connect the
elbow assembly to handshower.
2
Advertisement
