Final Checks & Road Test - Ventum NS1 User Manual

FINAL CHECKS & ROAD TEST
1. Install your pedals as per the manufacturer's instructions.
2. Check the tire pressure and inflate as per the manufacturer's
recommendation.
3. Adjust the saddle height as necessary. Ensure the seat post minimum
insertion depth of 10 cm is achieved.
4. Put on your shoes and helmet and take your new bike out for a road
test. Always wear a helmet when you ride your bicycle.
5. Check the operation of the brakes, derailleurs, and steering.
WARNING
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD LEAD TO SERIOUS INJURY OR DEATH.
22
ENJOY YOUR NEW RIDE!
23