Advertisement
F INAL CHECKS & R OA D T EST
1. Install your pedals as per the manufacturer's instructions.
2. Check the tire pressure and inflate as per the wheel manufacturer's
recommendation. If the wheel and tire manufacturers recommend different
pressure ranges, use the lower of the two.
3. Adjust the saddle height as necessary. Ensure the seat post minimum insertion
depth of 10cm is achieved. Torque the seatpost clamp bolt to 6 N.m.
4. Put on your shoes and helmet and take your new bike out for a road test. Always
wear a helmet when you ride your bicycle.
5. Check the operation of the brakes, derailleurs, and steering.
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD LEAD TO SERIOUS INJURY OR DEATH.
WARNING
24
QUIC K R E F E R E N CE S PECS
Torque Spec: 6 N.m.
S EAT P OST
Use a torque wrench with 5mm
CL A M P
hex attachment
Torque Spec: 10 N.m.
TH RU
Use a 6mm Hex Tool
AXLES
Torque Spec: 5-6 N.m. depending
on stem make and model. Check
STE M
stem for torque spec indications or
B O LTS
check with manufacturer.
Max 700C x 35mm
T I RE
Tire clearance varies based on
SI Z I NG
internal rim width
60-73 PSI
T I RE
Adjust as conditions and
PRES SU RE
equipment allow
VENTU MR ACING .COM
E N JOY YO U R
N EW R I D E !
Advertisement
