Bosch YOU Series Original Instructions Manual page 28

28 | English
During the charging process, the power tool is deactivated and cannot be used.
If you are not planning to use the power tool again soon, disconnect the power adaptor
(9) from the mains.
Inserting and removing the battery (see figure A)
Do not use force to insert the battery. The battery is designed in such a way that it
u
can only be inserted into the power tool when it is in the right position.
– Slide the battery (5) all the way into the battery bay (12).
– To remove the battery (5), press the release button (6) on the battery and pull it out
of the battery bay (12).
Follow the instructions on correct disposal.
Battery charge indicator
The battery charge indicator (2) is automatically activated when the battery (5) is
moved. The battery charge indicator (2) goes out if the battery (5) is not moved for a few
seconds. The battery charge indicator (2) is switched off when the power tool is being
used.
Charging
in the power tool (in motion)
100 %
100 %−50 %
50 %−20 %
20 %−5 %
5 %−0 %
Note: If the battery (5) has been stored away and not been used for a long period of
time, it is possible that the battery charge indicator (2) will not be activated. This pro-
tects the battery (5) from deep discharge. Once the battery (5) is charged, the indicator
will be activated again. In this case, the charging time may increase.
The battery charge indicator (2) goes out a few minutes after the battery (5) has been
fully charged.
1 609 92A 54D | (29.05.2019)
Battery separate or
Green
(continuous)
Green
(continuous)
Yellow
(continuous)
Red
(continuous)
Red
(flashing)
Charging process
(battery with connected power
adaptor)
Green
(continuous)
Green
(flashing)
Green
(flashing)
Green
(flashing)
Green
(flashing)
Bosch Power Tools