Bosch YOU Series Original Instructions Manual page 29

Note: If the battery charge indicator (2) is flashing white, the temperature is outside the
permitted ambient temperature range. The charging process begins automatically once
the permitted temperature range has been reached again. The battery charge indicator
(2) will flash green during the charging process.
Sanding sheets with hook-and-loop backing (see figure B)
Remove dirt and dust from the sanding plate (7), e.g. with a brush, before attaching a
new sanding sheet. Tap the hook-and-loop fastening of the sanding plate (7) before fit-
ting the sanding sheet (11) to facilitate maximum adhesion.
The sanding plate (7) is fitted with a hook-and-loop fastening, allowing sanding sheets
(11) with a hook-and-loop backing to be secured quickly and easily.
Position the sanding sheet (11) so that it is flush with one a side of the sanding plate (7),
then place the sanding sheet on the sanding plate and press it on firmly.
To remove the sanding sheet (11), take hold of it by a corner and pull it away from the
sanding plate (7).
Choosing the sanding sheet
Different sanding sheets are available, depending on the material you are working with
and the required surface removal rate:
Can be used to work on all materials including wood,
paint, filler, varnish, hard and softwood as well as chip-
board and metal.
For pre-sanding, e.g. of rough and uneven beams and
boards
For surface sanding and levelling of slight irregularities
For finishing and fine sanding of hard woods
For any finishing work, such as polishing (metal and stone in particular), use fleece/pol-
ishing felt.
Different types of fleece and polishing felts should be used depending on the surface fin-
ish required on the workpiece.
Dust/Chip Extraction
Dust from materials such as lead-containing coatings, some wood types, minerals and
metal can be harmful to one's health. Touching or breathing-in the dust can cause allergic
reactions and/or lead to respiratory infections of the user or bystanders.
Bosch Power Tools
English | 29
Grit
40–240
Coarse 40, 60
Medium 80, 120
Fine 180, 240
1 609 92A 54D | (29.05.2019)