Bosch YOU Series Original Instructions Manual page 30

30 | English
Certain dust, such as oak or beech dust, is considered carcinogenic, especially in con-
nection with wood-treatment additives (chromate, wood preservative). Materials con-
taining asbestos may only be worked by specialists.
– Provide for good ventilation of the working place.
– It is recommended to wear a P2 filter-class respirator.
Observe the relevant regulations in your country for the materials to be worked.
Avoid dust accumulation at the workplace. Dust can easily ignite.
u
External dust extraction (see figure D)
Mount the dust extraction adapter (13). Push it in direction ➊ onto the sanding plate.
Snap the dust extraction adapter (13) shut in direction ➋ so that the dust extraction ad-
apter (13) covers the sanding plate.
Fit a dust extraction hose (14) onto the extraction outlet (15).
Connect the dust extraction hose to an extractor. You will find an overview of connecting
to various dust extractors at the end of these operating instructions.
The dust extractor must be suitable for the material being worked.
When extracting dry dust that is especially detrimental to health or carcinogenic, use a
special dust extractor.
Operation
Starting operation
Ensure that the flap of the USB Type-C
u
prevent dust from getting in.
Switching on/off
To switch on the power tool, press the on/off switch (1).
To switch off the power tool, press the on/off switch (1) again.
Practical Advice
Always wait until the power tool has come to a complete stop before placing it
u
down.
The material removal rate and the sanding result are primarily determined by the choice
of sanding sheet and the contact pressure.
Only immaculate sanding sheets achieve good sanding performance and make the power
tool last longer.
1 609 92A 54D | (29.05.2019)
TM
port (4) is closed during operation. This will
Bosch Power Tools