Bosch YOU Series Original Instructions Manual page 27

may differ. This may significantly increase the vibration and noise emissions over the
total working period.
To estimate vibration and noise emissions accurately, the times when the tool is
switched off or when it is running but not actually being used should also be taken into
account. This may significantly reduce vibration and noise emissions over the total work-
ing period.
Implement additional safety measures to protect the operator from the effects of vibra-
tion, such as servicing the power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Fitting
Remove the battery before cleaning or performing maintenance work on the
u
power tool, before making tool adjustments, changing accessories or storing the
power tool. This safety measure prevents the power tool from being started accident-
ally.
Charging the battery (see figure C)
Use only the power adaptors listed in the technical data. Only these power ad-
u
aptors are matched to the lithium-ion battery of your power tool.
Note: The battery is supplied partially charged. To ensure the maximum performance of
the battery, use the power adaptor to fully charge the battery before first use.
The lithium-ion battery can be charged at any time without reducing its service life. Inter-
rupting the charging process does not damage the battery.
The lithium-ion battery is protected against deep discharge by the Electronic Cell Protec-
tion (ECP). When the battery is discharged, the power tool is switched off by means of a
protective circuit: The application tool stops moving.
Do not continue to press the On/Off switch after the power tool has automatic-
u
ally switched off. The battery can be damaged.
The battery features NTC temperature monitoring, which only permits charging in a tem-
perature range between 10 °C and 35 °C. This gives the battery a long service life.
You can charge the battery (5) separately or in the power tool.
– Open the flap (4).
– Connect the battery (5) to the power adaptor (9) using a USB cable (10).
– Plug the power adaptor (9) into the plug socket.
The charging process begins. The battery charge indicator (2) indicates the charging
progress.
Bosch Power Tools
English | 27
1 609 92A 54D | (29.05.2019)