Agilent Technologies BenchCel Microplate Handler Quick Manual page 22

Using BenchCel Diagnostics
Sending the robot to the home position
22
2
Click Initialize this profile to establish communication with the BenchCel Microplate
Handler and load the profile information.
The home position is where the robot head is at the center of the BenchCel Microplate
Handler and the robot arms are perpendicular to the x-axis. You send the robot to the
home position if you want the robot out of the way in a safe position.
To send the robot to the home position:
1
In the Controls tab, click the Jog/Teach tab.
2
Click Go Home.
G5580A BenchCel Microplate Handler Quick Guide