Linux - Fujitsu ETERNUS LT20 S2 User Manual

Chapter 1 Overview
1.2 References for Setup
Refer
1.2.2

Linux

1.2.2.1 SAS Connection for Linux [SAS Model]
The following procedure explains how to connect the LT20 S2/LT40 S2/LT60 S2 to a Linux server with a SAS
connection.
Workflow
Refer
Refer
FUJITSU Storage ETERNUS LT20 S2/LT40 S2/LT60 S2 Tape Library User's Guide -Server Connection-
Setting Backup Software
Apply patches, set the robot driver, and set the backup software.
•
Backup software used
-
NetBackup
•
"4.1 NetBackup" (page 47)
-
NetWorker
•
"4.2 NetWorker" (page 51)
-
IBM Spectrum Protect (IBM Tivoli Storage Manager)
•
"4.3 IBM Spectrum Protect" (page 53)
Making a Check before Starting the Procedure
Check the environment (operating system, backup software, and HBAs) of the server to be
connected to the LT20 S2/LT40 S2/LT60 S2.
-
"1.1 Operating Environment" (page 17)
Setting the LT20 S2/LT40 S2/LT60 S2
Perform the settings for the LT20 S2/LT40 S2/LT60 S2.
-
"2.1 Settings for SAS Connections" (page 31)
Copyright 2021 FUJITSU LIMITED
22
P3AM-5322-12ENZ0