Fujitsu ETERNUS LT20 S2 User Manual page 59

Chapter 4 Setting the Backup Software
4.5 NetVault
7
8
9
10
11
FUJITSU Storage ETERNUS LT20 S2/LT40 S2/LT60 S2 Tape Library User's Guide -Server Connection-
Confirm that the item described below is set to "ON".
Change to "ON" if this item is currently set to "OFF".
• Cleaning Tapes Supported
Enter "b" and then press the [Enter] key.
Return to the Drive Configuration screen.
In the Device Configuration screen, enter "s" to save the settings.
The drive setting is complete.
Enter "q" to quit the Drive Configuration screen.
Execute the following command to perform the library cleaning settings.
deviceconfig.exe –username <user_name_for_NetVault> -password <password>
-librarymachine <NetVault_machine name_where_the_library_is_connected>
-libraryname <library_name>
The Changer Configuration screen appears.
Copyright 2021 FUJITSU LIMITED
59
P3AM-5322-12ENZ0