Notes On Using Solaris Os - Fujitsu ETERNUS LT20 S2 User Manual

Chapter 4 Setting the Backup Software
4.1 NetBackup
4.1.3

Notes on Using Solaris OS

• For Solaris 10 OS or Solaris 11 OS, only the global zone is supported by NetBackup.
• When using NetBackup on Solaris 11.4 OS, perform the following actions.
(1) Apply SRU19061 or later to Solaris 11.4 OS.
(2) Disable the shared memory on the NetBackup master server with the following procedure.
•
•
1
2
3
4
5
• When NetBackup is installed on a Solaris OS server, system IPC resources must be added for NetBackup
interprocess communication. For details, refer to the manual supplied with your backup software.
FUJITSU Storage ETERNUS LT20 S2/LT40 S2/LT60 S2 Tape Library User's Guide -Server Connection-
This procedure must be performed on the Solaris NetBackup master server.
This procedure does not need to be performed on the Solaris NetBackup media server or client.
Procedure
Stop the NetBackup service.
Copy "server.conf" to back it up.
Example
# cd /usr/openv/var/global
# cp -rp server.conf server.conf-orig
Add "-hs" to the options specified in the "server.conf" file.
In the following example, "-hs" is added before "-k".
# cat /usr/openv/var/global/server.conf
-c 200M -ch 32768M -cl 200M -gd DBA -gk DBA -gl DBA -gna 1 -gp 4096 -hs -k -m
-n NB_bk_server
-o /usr/openv/db//log/server.log -os 1M -ti 0 -ud -wc- -x
tcpip(LocalOnly=YES;ServerPort=13785)
Start the NetBackup service.
Check "/usr/openv/db/log/server.log" after starting the NetBackup service.
Make sure the following messages are not displayed when NetBackup is started.
I. 02/05 08:37:56. Trying to start SharedMemory link ...
I. 02/05 08:37:56. SharedMemory link started successfully
Copyright 2021 FUJITSU LIMITED
48
End of procedure
P3AM-5322-12ENZ0