Fujitsu ETERNUS LT20 S2 User Manual page 28

Chapter 1 Overview
1.2 References for Setup
1.2.3.2 Fibre Channel Connection (FC-AL Connection) for Windows
The following procedure explains how to connect the LT20 S2/LT40 S2/LT60 S2 to a Windows server with an FC-
AL connection (direct connection to a server).
Workflow
Refer
IMPORTANT
Refer
Refer
FUJITSU Storage ETERNUS LT20 S2/LT40 S2/LT60 S2 Tape Library User's Guide -Server Connection-
Making a Check before Starting the Procedure
Check the environment (operating system, backup software, and HBAs) of the server to be
connected to the LT20 S2/LT40 S2/LT60 S2.
-
"1.1 Operating Environment" (page 17)
Setting the LT20 S2/LT40 S2/LT60 S2
Perform the settings for the LT20 S2/LT40 S2/LT60 S2.
Change the topology setting to "Point to Point" or "Arbitrated Loop". Set fixed values for the link
speed and the Loop ID.
-
"Chapter 2 Setting the LT20 S2/LT40 S2/LT60 S2" (page 31)
-
"2.2 Settings for Fibre Channel Connections" (page 31)
-
"2.2.1 Setting the Link Speed" (page 31)
-
"2.2.2 Setting the Topology and the Loop ID (for Direct Host Connections)" (page 32)
Setting the Operating System
Perform the settings for the HBA driver and the tape driver.
-
"3.3 Windows" (page 41)
-
"3.3.2 Fibre Channel Connections" (page 42)
Copyright 2021 FUJITSU LIMITED
28
P3AM-5322-12ENZ0