Related Manuals for Celexon PL400 HC plus
Summary of Contents for Celexon PL400 HC plus
- Page 1 Installation Manual celexon projector lift PL400 HC plus – 120V Thank you for purchasing this product. Please read the installation manual carefully and keep for future reference.
- Page 2 Introduction Before installing the projector lift, please read the following instructions carefully: • The projector lift must be used indoors only • IT IS FORBIDDEN TO STAND UNDER THE LIFT • Please confirm that your projected image width will fit your screen from your proposed mounting location prior to installation •...
- Page 3 4 x sliding angles 4 x threaded bars M6x25mm 12 x M6 nuts 1 x plastic spiral to collect 5 x cable ties 1 x installation manual the projector cables 4 x ceiling panel screws (L1) 4 x threaded ceiling panel screws (L2) 4 x hex screws M6x10mm (M) fig.
- Page 4 Once the lift has been installed, position the projector under the 3 mounting brackets and attach with the hex screws (M) as shown in fig 3. PLEASE NOTE: Please ensure that the load centre of the projector is in the middle of the lift. The mounting bra-ckets can be moved easily.
- Page 5 Turn the screw A on the motor clockwise to lower the upper ‘stop position’ (see fig 6). To set the lower ‘stop position’: Turn the screw B on the motor clockwise to reduce the lower ‘stop position’ (see fig 6). To turn the fig.
- Page 6 The installation is complete when all the screws have been tightened and the panel is central and flush with the ceiling. The lift must not descend more than 40cm. Please ensure that when the lift is retracted, there is sufficient space and the projector and cables are not crushed.
- Page 7 fig. 6 fig. 5 fig. 8 fig. 7 fig. 10 fig. 9...
- Page 8 Germany GmbH & Co. KG Address: Gutenbergstraße 2, 48282 Emsdetten, GERMANY hereby declares the that the following product Product name: celexon projector lift PL400 HC plus - 120V Part number: PL400 HC Plus - 120V Manufacturer: celexon Germany GmbH & Co. KG...
- Page 9 www.celexon.com...