6-4
5. Click Present in the Battery Backup field.
The Battery Module screen appears, as shown in the following
figure. This screen contains the following information:
–
Battery information
–
Design information
–
Capacity information
–
Auto Learn properties
Figure 6.3
Battery Module Screen
Most of the Battery Module properties are view-only and are self-
explanatory.
In the lower right corner of the screen are the Auto Learn options. A
learning cycle is a battery calibration operation performed by the
controller periodically to determine the condition of the battery. You
can change the learn delay interval and the auto learn mode.
Note:
IBM recommends leaving the the learn delay interval and
the auto learn mode at their default settings.
Using the ServeRAID M5000 Series Battery Assembly