Step 2: Charging The Battery Pack - Sony DCR-SR220 Handycam&reg Handbook

Step 2: Charging the battery pack

Battery pack
You can charge the "InfoLITHIUM"
battery pack (H series) (p. 94) after
attaching it to your camcorder.

Notes
Your camcorder operates only with an

"InfoLITHIUM" battery pack (H series).
1
Connect the AC Adaptor to the DC
IN jack on the Handycam Station.
Be sure that the  mark on the DC plug
is facing up.
2
Connect the power cord (mains
lead) to the AC Adaptor and the wall
outlet (wall socket).
3
Turn the POWER switch in the
direction of the arrow to OFF (CHG)
(the default setting).
DC IN jack
DC plug
lamp
POWER switch
AC Adaptor
Power cord (Mains lead)
4
Attach the battery pack by sliding it
in the direction of the arrow until it
clicks.
5
Set the camcorder onto the
Handycam Station securely.
The /CHG (charge) lamp lights up and
charging starts.
The /CHG (charge) lamp turns off
when the battery pack is fully charged.
When setting the camcorder onto the

Handycam Station, close the DC IN jack
cover.

Notes
Disconnect the AC Adaptor from the DC IN

jack holding both the Handycam Station and
the DC plug.
/CHG (charge)
To the wall outlet
(wall socket)
13