Recording movies
1
Turn the POWER switch until the
(Movie) lamp lights up.
2
Press START/STOP (or ).
To stop recording, press START/STOP
again.
Tips
For the recordable time and the number of
recordable images, see pages 58 and 60.
You can record still images by pressing PHOTO
during movie recording ([Dual Rec],
(p. 28)).
A frame is shown on the detected face, and the
detected face image is optimized automatically
([FACE DETECTION], p. 61).
When a face is detected during movie
recording,
flashes and the detected face is
stored in the index. You can search for a desired
scene by a face image when playing back ([Face
Index], p. 61).
You can switch the recording mode by touching
(HOME) (or )
[MOVIE] or [PHOTO].
You can create still images from recorded
movies (p. 41).
26
[STBY] [REC]
(CAMERA)
Recording still images
1
Turn the POWER switch until the
(Still) lamp lights up.
2
Press PHOTO lightly to adjust the
focus (a beep sounds), then press
it fully (a shutter click sounds).
Flashing Lights up
appears beside
disappears, the image has been
recorded.
or
. When