Sony DCR-SR220 Handycam&reg Handbook page 76


Notes
Set [WHITE BAL.] to [AUTO] or adjust the

color in [ONE PUSH] under white or cool
white fluorescent lamps.
When you select [ONE PUSH], keep framing

white object while
flashes slowly if [ONE PUSH] could not be

set.
When [ONE PUSH] was selected, if

flashing after touching
to [AUTO].
When you set [WHITE BAL.], [SCENE

SELECTION] is automatically set to [AUTO].
 Tips
If you changed the battery pack, or moved your

camcorder to or from outdoors when [AUTO]
was selected, aim your camcorder at a nearby
white object with [AUTO] for about 10 seconds
for better color balance adjustment.
If you change the [SCENE SELECTION]

settings or move your camcorder outdoors
during white balance setting with [ONE PUSH],
you need to repeat the [ONE PUSH] operation.
COLOR SLOW SHTR
(Color Slow Shutter)
When you set [COLOR SLOW SHTR] to
[ON], you can record an image brighter in
color even in dark places.
appears on the screen.
To cancel [COLOR SLOW SHTR], touch
[OFF].

Notes
Adjust the focus manually ([FOCUS], p. 73)

when it is hard to focus automatically.
The shutter speed of your camcorder changes

depending on the brightness, which may result
in a slowdown of the motion of the image.
SUPER NIGHTSHOT
The image will be recorded at a
maximum of 16 times the sensitivity of
NightShot recording if you set [SUPER
NIGHTSHOT] to [ON] while the
NIGHTSHOT switch (p. 28) is also set to
76
is flashing quickly.
keeps
, set [WHITE BAL.]
ON.
appears on the screen.
To cancel, touch [OFF].

Notes
Do not use [SUPER NIGHTSHOT] in bright

places. This may cause a malfunction.
Do not cover the infrared port with your fingers

or other objects.
Remove the conversion lens (optional).

Adjust the focus manually ([FOCUS], p. 73)

when it is hard to focus automatically.
The shutter speed of your camcorder changes

depending on the brightness, which may result
in a slowdown of the motion of the image.
FADER
You can record a transition with the
following effects adding to the interval
between scenes.
 Select the desired effect in [STBY] (to fade in)
or [REC] (to fade out) mode, then touch
 Press START/STOP.
The fader indicator stops flashing and
disappears when the fade is complete.
To cancel the fader before starting the
operation, touch [OFF] in step .
If you press START/STOP, the setting is
canceled.
Fading out
WHITE FADER
BLACK FADER
.
Fading in