Page 1
Caring for the door and drum of your appliance Cleaning the pump Checking the water inlet hose Precautions and tips, 5 General safety Disposal EFML 923 Opening the porthole door manually Description of the washing machine and starting a wash cycle, 6-7 Control panel Indicator lights...
Page 2
Installation Levelling the machine correctly will provide ! This instruction manual should be kept in a it with stability, help to avoid vibrations and safe place for future reference. If the washing excessive noise and prevent it from shifting machine is sold, transferred or moved, make while it is operating.
Page 3
(see figure). The free end Technical data of the hose should not be underwater. Model EFML 923 width 59.5 cm Dimensions height 85 cm ! We advise against the use of hose extensions; depth 60,5 cm...
Page 4
Care and maintenance Cutting off the water and electri- Caring for the door and drum of city supplies your appliance • Turn off the water tap after every wash cycle. • Always leave the porthole door ajar in order This will limit wear on the hydraulic system in- to prevent unpleasant odours from forming.
Page 5
Precautions and tips Opening the porthole door manually This washing machine was designed and constructed in accordance with international safety regulations. The fol- In the event that it is not possible to open the porthole lowing information is provided for safety reasons and must door due to a powercut, and if you wish to remove the therefore be read carefully.
Page 6
Description of the washing machine and starting a wash cycle Control panel WASH CYCLE PROGRESS/ DELAY TIMER indicator lights SPIN SPEED knob DOOR ON/OFF button LOCKED TEMPERATURE indicator light knob START/PAUSE button with indicator light FUNCTION Detergent dispenser drawer buttons with indicator lights WASH CYCLE knob...
Page 7
Indicator lights Wash cycle phase indicator lights Once the desired wash cycle has been selected and has begun, the indicator lights switch on one by one to indicate The indicator lights provide important information. which phase of the cycle is currently in progress. This is what they can tell you: Wash Delayed start...
Page 8
Wash cycles Table of wash cycles Detergents Max. Max. Description of the wash cycle temp. speed (°C) (rpm) CLEAN Plus Anti Stain 40° 1200 180’ Anti Stain Quick 40° 1200 60’ Whites 60° 1200 180’...
Page 9
Personalisation Setting the temperature Turn the TEMPERATURE knob to set the wash temperature (see Table of wash cycles). The temperature may be lowered, or even set to a cold wash ( ). The washing machine will automatically prevent you from selecting a temperature which is higher than the maximum value set for each wash cycle.
Page 10
Detergents and laundry Detergent dispenser drawer Garments requiring special care Good washing results also depend on the correct dose of Wool: the wool wash cycle of this machine has been detergent: adding too much detergent will not necessa- approved by The Woolmark Company for the washing of rily result in a more efficient wash, and may in fact cause wool garments labelled as “hand wash”...
Page 11
Troubleshooting Your washing machine could fail to work. Before contacting the Technical Assistance Centre (see “Assistance”), make sure that the problem cannot be solved easily using the following list. Problem: Possible causes / Solutions: The washing machine does not • The appliance is not plugged into the socket fully, or is not making contact. switch on.
Page 12
Service Before calling for Assistance: • Check whether you can solve the problem alone (see “Troubleshooting”); • Restart the programme to check whether the problem has been solved; • If this is not the case, contact an authorised Technical Assistance Centre using the telephone number provided on the guarantee certificate.
Nettoyage de la pompe Contrôle du tuyau d’arrivée de l’eau Précautions et conseils, 17 Sécurité générale Mise au rebut Ouverture manuelle du hublot EFML 923 Description du lave-linge et démarrage d’un programme, 18-19 Bandeau de commandes Voyants Démarrage d’un programme...
Installation ! Conserver ce mode d’emploi pour pouvoir Une bonne mise à niveau garantit la stabilité le consulter à tout moment. En cas de vente, de l’appareil et évite qu’il y ait des vibrations, de cession ou de déménagement, veiller à du bruit et des déplacements en cours de ce qu’il suive toujours le lave-linge pour que optionnement.
Caractéristiques techniques avec l’appareil au robinet (voir figure). L’extrémité libre du EFML 923 Modèle tuyau d’évacuation ne doit pas être plon- largeur 59,5 cm gée dans l’eau. Dimensions hauteur 85 cm profondeur 60,5 cm ! L’utilisation d’un tuyau de rallonge est abso-...
Entretien et soin Coupure de l’arrivée d’eau et du Nettoyage de la pompe courant Le lave-linge est équipé d’une pompe auto- nettoyante qui n’exige aucune opération d’en- • Fermer le robinet de l’eau après chaque tretien. Il peut toutefois arriver que de menus lavage.
Précautions et conseils concernant la démarche à suivre pour l’enlèvement de Ce lave-linge a été conçu et fabriqué conformément aux leur vieil appareil. normes internationales de sécurité. Ces consignes sont fournies pour des raisons de sécurité, il faut les lire attenti- Ouverture manuelle du hublot vement.
Description du lave-linge et démarrage d’un programme Bandeau de commandes DÉROULEMENT Voyants CYCLE/DÉPART DIFFÉRÉ Bouton ESSORAGE Voyant ON/OFF HUBLOT Touche Bouton VERROUILLÉ TEMPÉRATURE Touche avec voyant START/PAUSE Touches avec voyants Tiroir à produits lessiviels FONCTION Bouton PROGRAMMES Tiroir à produits lessiviels: pour charger les produits Touche avec voyant START/PAUSE: pour démarrer les lessiviels et les additifs (voir “Produits lessiviels et linge”).
Page 19
Voyants Voyants phase en cours Une fois que le cycle de lavage sélectionné a démarré, les voyants s’allument progressivement pour indiquer son Les voyants fournissent des informations importantes. stade d’avancement: Voilà ce qu’ils signalent: Lavage Départ différé Si la fonction “Départ différé” a été activée (voir “Personnali- Rinçage sations”), le voyant correspondant au temps sélectionné...
Personnalisations Sélection de la température Tourner le bouton TEMPÉRATURE pour sélectionner la température de lavage (voir Tableau des programmes). La température peut être abaissée jusqu’au lavage à froid ( ). La machine interdira automatiquement toute sélection d’une température supérieure à la température maximale prévue pour chaque programme.
Produits lessiviels et linge Tiroir à produits lessiviels Linge ou vêtements particuliers Un bon résultat de lavage dépend aussi d’un bon dosage Laine: le cycle de lavage « Laine » de ce lave-linge a été de produit lessiviel: un excès de lessive ne lave pas mieux, approuvé...
Anomalies et remèdes Il peut arriver que le lave-linge ne fonctionne pas bien. Avant d’appeler le Service de dépannage (voir “Assistance”), contrôler s’il ne s’agit pas par hasard d’un problème facile à résoudre à l’aide de la liste suivante. Causes / Solutions possibles: Anomalies: Le lave-linge ne s’allume pas.
Assistance 195121285.01 03/2014 - Xerox Fabriano Avant d’appeler le service après-vente: • Vérifier si on ne peut pas résoudre l’anomalie par ses propres moyens (voir “Anomalies et Remèdes”); • Remettre le programme en marche pour contrôler si l’inconvénient a disparu; •...
Need help?
Do you have a question about the EFML 923 and is the answer not in the manual?
Questions and answers