Advertisement
Technical Specifications
LAN Port Control Instruction
I. LAN Port Control
Method A) When connecting device with a router with DHCP features.
The matrix switcher will auto obtain an IP address, so you can scan the device directly by the control software.
Method B) When connecting VZ-MV1602-SDI with a PC without DHCP.
Please make sure that device and PC are in the same local area network, and set PC's IP address to
"192.168.1.xxx", except device's default IP address 192.168.1.215, then press the "scanning" button on
control software to scan the device. If the device cannot be found, wait 30s and then scan again.
PS: check the LAN port indicators to see current state of device.
Yellow indicator blinking --- data is transmitting
Green indicator keeps on --- connect successfully with Ethernet
II. Seiral Port Control
1. Connecting device with a PC via serial port.
2. Press the SETTING
6
Advertisement
