Important Safety Instruction 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Page 5
- The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed no the apparatus. 14 Minimum distances(e.g. 10cm) around the apparatus for sufficient ventilation. “WARNING – To reduce the risk of fire or electric shock, do not expose the apparatus to rain or moisture.” “The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.”...
Page 6
CAUTION The power supply cord is used as the main disconnect device, ensure that the socket-outlet is located/installed near the equipment and is easily accessible. ATTENTIONN Le cordon d`alimentation est utillsé comme interrupteur général. La prise de courant doit être située ou installée à...
Page 7
NOTE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Before setting up the monitor, ensure that the power to the monitor and other attached devices are turned off. ※ Notice: Stand & Screws are optional A. Connecting the stand A-1. Place the monitor with its front facing downward on a soft cloth. 2.
Remote Controller 1. POWER( Turns the power ON or OFF. There will be a few seconds delay before the display appears. 2. SOURCE Not operating. 3. ARC (Aspect Ratio Control) Selects a screen ratio. 4. APC (Auto Picture Control) Selects a picture mode. 5.
Page 11
Bottom Key Control 1. SOURCE/ Selects an input source. Enters a submenu or accepts your selection in the OSD menu. ( OSD menu works with HDMI only.) 2. MENU Activates or exits the OSD. Moves previous menu or status in the OSD. 3 &...
OSD Menu Description All picture, sound settings and setup for the monitor can be adjusted in the OSD menu. (On Screen Display) To adjust the OSD screen: 1. Press the Menu button to enter the OSD menu. 2. Press the ▲/▼ buttons to select the desired option. The selected option is highlighted. 3.
Page 13
B. SETUP Option Function Value English, German, French, Language Sets the language of the OSD menu. Italian, Spanish, Nederland and Korea Sets the OSD. See the table on Next page Locks all buttons of the monitor. Key Lock Off or On Note: Use remote controller to unlock.
Page 14
C. OSD Option Function Value H POSITION Move OSD horizontally on screen right or left. 0 ~ 100 V POSITION Move OSD vertically on screen up or down. 0 ~ 100 OSD TIMER Adjust OSD displaying time. 5 ~ 60 TRANSPARENT Adjust OSD transparent.
Main Screen 1. IP camera app 2. VMS or Favorites Folder (This folder is not locked) 3. All apps (Password Protected) 4. Background 5. Navigation bar Shortcut to the app If you click button, you can add new IP camera. If you long-click button, all controls are locked.
Page 16
Enter camera information and click update to add to available camera list. Select the saved IP camera from the available camera list. IP camera’s picture is displayed. - 14 -...
Page 17
Shortcut to the VMS You can add apps to VMS/Favorites Folder by long-clicking the app within the All Apps area. From the VMS Shortcut menu, click an app to open it. (Long-clicking the app will remove it). *Password The button to access all apps requires a password.
Background If you long-click the background, you can change background image. Navigation bar Back Home Muti Power Hide Screen Volume Volume Menu Capture Down - 16 -...
Last App Recovery Upon reboot, this feature will automatically resume the last app that was used in the event that power was lost. Ethernet Settings Open “Settings in the “All Apps” section. Click on the Ethernet tab. Enable “Use Ethernet”. A static IP Address can also be added in this section - 17 -...
Page 20
Wall mounting (Optional) The LCD monitor is suitable for wall mounting by using the VESA 100 standard wall mount (not included in the delivery). M4x10 screws ※ Attention! You must use four M4x10 screws to assemble this monitor and the wall mount bracket. ※...
Page 21
Power Consumption Mode Power Consumption < 25W Turned On Turned Off < 1W LED Indicator The power management feature of the monitor is comprised of two stages: Turned on(Blue) and turned off(LED Off). Mode Monitor Operation Turned On Blue Normal Operation Turned Off Not Operation ▶...
Page 22
21.5” 21.5˝ Diagonal AM-TFT(Active-Matrix) Pixel pitch(mm): 0.24825(H) x 0.24825(V) Brightness: 250cd/m² (Typical) LCD Type Contrast ratio: 1000:1 (Typical) Viewing angle: 170°/160° (H/V) Response time: 5ms (Typ., on/off) Resolution (H x V) 1920X1080@60Hz Horizontal: 31~80kHz, Frequency Vertical: 56~60Hz UPGRADE USB HOST1,2 MICRO SD CARD Input Signal MICRO USB...
WEEE Symbols Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.