Advertisement
OSD Enable
Audio Alarm enable
Time Code Enable
Operating Mode
Matrix Switcher Input and
Output Correspondence
Select input source
Set the UMD content for
one channel
UMD enable for each
channel
Set the Audio source of
Multiview output
Audio meter enable for
One Window
Select the Channel of
Audio Meter for One
Window
Window border enable
UMD text color
UMD background color
Resolution text color
Resolution background
color
Time Code text color
Time Code background
color
Factory reset
Save the settings to
Custom1 or Custom2
Load Settings from
Custom1 or Custom2
Set the IP connecting
mode
Set Device Name
Turn on/off the OSD.
0x5d
1: ON, 0: OFF
Turn on/off the audio alarm function
0x56
1: ON, 0: OFF
Turn on/off time code
0x5e
1: ON, 0: OFF
Change operating mode between Multiviewer and Switcher.
0x62
0：Multiviewer, 1: Switcher
One to one correspondence between input and output
0x5a
under Matrix Switcher Mode. E.g.: input SDI1 by output SDI
1, input SDI2 by output SDI 2, ..., and so forth.
Select the input sources for both Matrix Switcher and
Multiviewer modes.
0x34
Matrix Command format: cmd + input ch + output ch
Multiviewer command format: cmd + input ch + win
Command format: cmd + ch +
0x1e
color
Blue words as default. See the Examples Part 4.13.
0x36
Command format: cmd + ch + enable (ON: 1, OFF: 0)
0: OFF,
0x39
1-16: corresponding to the channel number
0x37
Command format: cmd+ win + enable (ON: 1, OFF: 0)
Command format: cmd + win + value
0x52
Value refer to
(
0x3f
ON: 1, OFF: 0
0x3b
0x3c
0x3d
Channels 0-16,
0: All channels,
0x3e
1-16: corresponding to each
channel
0x54
0x55
0x0b
Parameter always as 0x00
0x58
1: save to custom1/ load from custom1
2: save to custom2/ load from custom2
0x59
The 13
0x05
0x01: dynamic IP (DHCP), 0x00: static IP
0x0f
Send the device name (max 16 character) by Unicode
+ char
Part 3.3.4 Audio Meter Channel List)
th
byte of the data bits.
3
enable + xpos + ypos+ font +
refers to
Color value
3.3.5 Color value List
Part
Advertisement
