Page 1
VZ-LED SERIES 21.5" 3G-SDI BROADCAST MONITOR USER MANUAL EDITION : May 2019 Please read this manual thoroughly before use, and keep it handy for future reference.
CONTENTS Safety Instruction ....................................... 1. Important Safety Instruction ............................... Installation ........................................1. Package ........................................2. Interface ........................................ Function .......................................... 1. Monitor Button Function ................................2. OSD Control and Function ................................Specification ........................................Trouble Shooting ......................................Visit the ViewZ USA website at https://www.viewzusa.com User Manual...
SAFETY INSTRUCTION Important Safety Instruction 1. Read all warnings. 2. Follow all instructions to ensure longevity of monitor. 3. Do not place the monitor near water. 4. Clean only with dry cloth. 5. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 6.
INSTALLATION Installation Tools The following tools may be required depending on your installation. Electronic Stud Finder Pencil Protective Eye-wear Level Phillips Screwdriver Assembly Components - provided Your ViewZ monitor is shipped with all proper installation hardware and components. If there are parts missing and/or damaged, please stop the installation and contact ViewZ USA at (888)-998-4399.
CONNECT EXTERNAL EQUIPMENTS Interface Input Ports y u i 1. 3G-SDI IN / OUT 5. YPbPr IN 2. USB (Upgrade only) 6. AUDIO IN 3. HDMI IN 7. AUDIO OUT 4. VGA 8. DC 12V IN User Manual Visit the ViewZ USA website at https://www.viewzusa.com...
CONTROL AND FUNCTION Monitor Button Function 1. Source 5. FN Select an input source User definable button. Default function is 'Waveform' 2. Menu 6. Power Enter the MENU, save the adjustment of sub-menu Monitor power on / off 7. LED Indicator and exit the OSD Blue color: monitor on 3.
Page 7
CONTROL AND FUNCTION Monitor Button Function Shortcut key: F1 user-definable function button ◄ ► Select "MEMU / SYSTEM / F1 Configuration" to custom F1 shortcut setting. Then press button to choose options. Press "MENU" to confirm option as default, then press EXIT to exit.
CONTROL AND FUNCTION Picture FUNCTION VALUE Brightness Setup the brightness 0 ~ 100 Contrast Setup the contrast 0 ~ 100 Tint Setup the tint 0 ~ 100 Sharpness Setup the sharpness 0 ~ 100 Color Temperature Setup the color temperature 6500⁰K, 7500⁰K, 9300⁰K, User Red Gain Setup the Red contrast(gain) level...
Page 9
CONTROL AND FUNCTION Function FUNCTION VALUE Scan Change the scan mod Aspect, Pixel to Pixel, Zoom Aspect Setup the display ratio Full, 1.85:1, 2.35:1, 4:3, 3:2 Display Scan Display the scan mode Fullscan, Overscan, Underscan Check Field Setup the display color Off, Mono, Red, Green, Blue Zoom Display the original image resolution...
Page 10
CONTROL AND FUNCTION Audio FUNCTION VALUE Volume Adjust volume on monitor 0 ~ 100 Level Meter Turn on/off the embedded audio OFF, ON Audio Channel Setup the embedded audio channel for Ch 0 / Ch 1, Ch 2 / Ch 3, Ch 4 & Ch 5 internal speaker or Audio OUT Ch 6 / Ch 7, Ch 8 / Ch 9, Ch 10 &...
SPECIFICATION Model No. VZ-215LED-L1 Panel Type 21.5'' LED Backlit Monitor Pixel Pitch 0.24825 (H) x 0.24825 (V) mm Brightness 250 cd/m² Contrast Ratio 1000 : 1(Typ.) Display Viewing Angle R/L : 85°/ 85° U/D : 80°/ 80° Color Depth 16.7 Million Colors Response Time <...
TROUBLESHOOTING GUIDE - Check the following before calling for service. - If the same problems continue after checking, contact the reseller you purchased the monitor from. We recommend that you test with different input sources when you have trouble with At start the current input source.
Page 14
NOTE Visit the ViewZ USA website at https://www.viewzusa.com User Manual...