Table of Contents
Advertisement
All manuals and user guides at all-guides.com
Color profile: Generic CMYK printer profile
Composite
To set a
remote
security code
To check your
messages
remotely
Notes
E:\Binatone2004\e820\e820_UK_03.vp
15 November 2004 11:48:21
Default screen
Remote operation
This is the three-digit code you need if you dial
home to check your messages. Unless you set a
different code (any three digits), it is 321.
1
Press and hold the CODE button (on the
underside of the base unit) for about 2 seconds
until the machine says 'Set security code' .
Then release the button
2
Press the FORWARD (MEMO) or REWIND
(OGM) button to set the first digit
3
Press the CODE button again
4
Repeat steps 2 and 3 to set the second and
third digits
To check your remote security code
Briefly press the CODE button
1
Using a tone dialling phone, dial your home number
2
When you hear your outgoing message, press
u You hear 'Security code' then a 'beep.
3
Key in your remote security code
u You hear one long 'beep'.
4
Press
to play back your messages
and/or use the keys listed overleaf
At steps 2, 3 and 4, you must press a key within
10 seconds, or the machine will cut off your call.
At step 3, if you key in the wrong code, you can try
again. You have up to three attempts to get the code
right before the machine cuts off your call.
After about 2½ minutes playback, the machine will
pause and you'll hear a tone (short 'beeps'). To
continue playback, press any key within 10 seconds.
If you don't press a key, your call will be cut off.
33
Advertisement
Table of Contents
