Table of Contents
Advertisement
All manuals and user guides at all-guides.com
Color profile: Generic CMYK printer profile
Composite
"The Recall
function doesn't
seem to work."
"Last Number
Redial and/or
memory dialling
don't work on
a PBX."
E:\Binatone2004\e820\e820_UK_03.vp
15 November 2004 11:48:23
Default screen
PBX use
You may need to press and hold the R button for a
couple of seconds, rather than pressing it briefly. Try
this and see if it works.
When you first make a call, press the Redial/CDS/P
button for a pause between the outside line access
code (e.g. 9) and the telephone number. You should
later be able to redial the number.
When storing numbers in memory, you can include the
outside line access code (e.g. 9) with each number.
If your PBX requires you to wait for a second Dial tone
before dialling the telephone number, press the
Redial/CDS/P button for a pause between the access
code and the number.
You can also set up your e820 so that it automatically
inserts a 2-second pause after you dial the outside line
access code, as follows:
1
Press the PROG button then 2 5 0
2
Key in the line access code (up to four
digits)
3
Press the PHONE/OK button to confirm
Troubleshooting
51
Advertisement
Table of Contents
