Table of Contents
Advertisement
All manuals and user guides at all-guides.com
Color profile: Generic CMYK printer profile
Composite
Troubleshooting
"My call was cut
off when I went
out of range.
Now I can't use
my handset."
"There is inter-
ference and
noise on the
line."
"I hear 'beeps'
from my
handset while
I'm on a call."
"When I try to
make a call, I
hear Busy
tone."
48
E:\Binatone2004\e820\e820_UK_03.vp
15 November 2004 11:48:22
Default screen
Move the handset closer to the base unit before you try
again to make a call.
Move the handset closer to the base unit, or to a
different position.
Try moving the base unit so that it's not near other
electrical equipment, such as a television or a
computer.
You'll get the best results if you site the base unit as
high as possible. For example, in a two-storey house,
the first-floor landing is an ideal place for the base unit.
You may be going out of range of the base unit. Move
closer, or your call may be cut off.
Check the Battery Level symbol on the display. If it is
low, recharge the batteries.
If you're using a e820 Twin system, or have extra
handsets registered to your base unit, check that
another handset isn't already in use on a call.
Advertisement
Table of Contents
