Indirect Network; To Set The Network Access Code - Binatone e820 User Manual

All manuals and user guides at all-guides.com
Color profile: Generic CMYK printer profile
Composite
To set the
network
access code
44
E:\Binatone2004\e820\e820_UK_03.vp
15 November 2004 11:48:22
Default screen

Indirect Network

You can use this feature if you make some of your calls
via a different network from the one that supplies your
exchange line. By using indirect access to an alternative
network, you may be able to save money on long-
distance and international calls. When you subscribe to
an alternative network provider, they will send you a
network access code
To route calls over the alternative network, you need to
key in the access code each time you make a call. Your
e820 can do this automatically when you dial a long-
distance or international number (beginning with 0),
either manually or from memory.
For local calls (numbers not beginning with 0), the
e820 will not dial the network access code; so these
calls will be routed over your local network. You can
also set two 'local' dialling codes, beginning with 0,
for which the network access code won't be dialled.
The network access code and the additional 'local'
dialling codes are set on the base unit, and apply to all
registered handsets. But you need to turn the Indirect
Network feature on and off on individual handsets.
1 Press the PROG button then 2 4 0
2 Key in the network access code (up to six
digits)
3 Press the PHONE/OK button to confirm