Specifications; Stihl Bga 200; Symbols On The Blower; Engineering Improvements - Stihl BGA 200 Instruction Manual

24 Specifications

24 Specifications

24.1 STIHL BGA 200

– Approved battery types:
– STIHL AR series
– STIHL AP series in combination with the STIHL AP
Battery Bag with Connecting Cord
– Maximum air velocity: 188 mph (84 m/s)
– Weight: 7.1 lbs. (3.2 kg)
For technical information regarding the STIHL AP and AR /
AR L series batteries, see the product information
accompanying your battery.
For technical information regarding the STIHL AL 101, 300
and 500 series chargers, see the product information
accompanying your charger.
Batteries, chargers and other accessories sold separately.
Contact your authorized STIHL servicing dealer for pricing
and availability.

24.2 Symbols on the Blower

Symbol Explanation
V Volt
DC Direct current
Push the retaining latch forward to switch the
blower on and to select the power level.
STIHL products must not be disposed of in the
household trash, but only in accordance with local,
state and federal laws and regulations and as
provided in this manual, @ 26.
0458-812-8621-A
Indicates the power hold button.

24.3 Engineering Improvements

STIHL's philosophy is to continually improve all of its
products. As a result, engineering changes and
improvements are made from time to time. Therefore, some
changes, modifications and improvements may not be
covered in this manual. If the operating characteristics or the
appearance of your machine differs from those described in
this manual, please contact your STIHL dealer or the STIHL
distributor in your area for assistance.

24.4 FCC 15 Compliance Statement

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
– this device may not cause harmful interference.
– this device must accept any interference received,
including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
– reorient or relocate the receiving antenna,
English
37