Risco ProSYS Plus Quick User Manual page 3

Activating Output
 code,
Activities menu,
Output number,
Note: Must be installer-defined
 Quick mode: Press button (1—3) for 2 seconds
 High security mode: Press button (1—3) for 2 seconds  enter code.
Note: Must be installer-defined
Activating a Panic Alarm
Press
for at least 2 seconds.
Press and
Activating a Fire Alarm
Press and
least 2 seconds.
Activating an Auxiliary Emergency Alarm
Press and
least 2 seconds.
SMS Commands
NOTES: Command words are not case sensitive. A separator between command words may be
used (or not). To receive an acknowledgement reply, add RP to the end of an SMS command.
Full Arm: code + A (Example: 1234A)
Home Arm: code + H
Group Arm: code + G + select group A--D
Full Disarm: code + D
Partition Full Arm: code + A: + partition number
Partition Home Arm: code + H: + partition number
Multiple Partition Full/Home Arm: code + A/
H: + partition number A, + partition number B,
+ partition number C, etc.
Partition Disarm: code + D: + partition number
Multiple Partition Disarm: code + D: +
partition number A, + partition number B, +
partition number C, etc.
01/2019
 scroll to
 enter Utility
.
and together
together for 2 seconds.
together for at
together for at
Page 3
 Quick mode: Press button (1—3) for 2
seconds
 High security mode: Press button (1—3)
for 2 seconds  code or use Proximity tag.
Note: Must be installer-defined
Press and
seconds
Press +
Press +
Get system status: code + ST
Bypass Zone: code + B + zone number
Un-bypass Zone: code + UB + zone number
View last alarm : code + AL
Change FM number: code + FMPHONE +
FM serial number + NEW + new phone number
Activate Output: code + UOON + UO number
Deactivate Output: code + UOOFF + UO number
Get SIM credit level: code + CR
Get SIM credit level: code + CR
together for 2
together for 2 seconds
together for 2 seconds
5IN2370 B