Table of Contents
Advertisement
Quick Links
ELITE 5 PRO | ELITE 10 PRO
ELITE 20 PRO | ELITE 30 PRO
Notice
AVOID EYE OR SKIN EXPOSURE
TO DIRECT OR SCATTERED LIGHT
CLASS 4 LASER PRODUCT
USER MANUAL
Manufactured / Certified by
Unity Lasers s.r.o.
Odborárska 23
831 02 Bratislava
Slovakia, Europe
Classified per IEC 60825-1: 2014
Complies with US FDA CDHR laser safety
standards 21 CFR 1040.10 & 1040.11
and Laser notice 56
Advertisement
Table of Contents
Related Manuals for UNITY Lasers ELITE 5 PRO
Summary of Contents for UNITY Lasers ELITE 5 PRO
- Page 1 USER MANUAL ELITE 5 PRO | ELITE 10 PRO ELITE 20 PRO | ELITE 30 PRO Notice Manufactured / Certified by Classified per IEC 60825-1: 2014 AVOID EYE OR SKIN EXPOSURE Unity Lasers s.r.o. Complies with US FDA CDHR laser safety Odborárska 23...
-
Page 2: Table Of Contents
• INTERLOCK RESET FUNCTION (REMOTE INTERLOCK BYPASS) MODEL SPECIFICATION • PRODUCT SPECIFICATION (ELITE 5 PRO) • FRONT & REAR PANEL VIEW (ELITE 5 PRO) • DIMENSION DETAILS (ELITE 5 PRO) • PRODUCT SPECIFICATION (ELITE 10 PRO) • FRONT & REAR PANEL VIEW (ELITE 10 PRO) •... -
Page 3: Introduction
UNITY Lasers s.r.o. Elite Pro series Operational Manual (Revision 2022-10) INTRODUCTION Thank you for purchasing your purchase. To optimize the performance of your laser, please read these operating instructions carefully and familiarize yourself with the basic operations of this system. These instructions contain important safety information regarding the use and maintenance of this system as well. -
Page 4: Safety Notes
UNITY Lasers s.r.o. Elite Pro series Operational Manual (Revision 2022-10) SAFETY NOTES WARNING! This projector is Class 4 laser product. It must never be used for audience-scanning applications. The output beam of the projector must always be at least 3 metres above the floor in the audience. See the Operating Instructions section for further information. -
Page 5: Laser And Safety Notes
UNITY Lasers s.r.o. Elite Pro series Operational Manual (Revision 2022-10) LASER AND SAFETY NOTES STOP AND READ ALL THE LASER SAFETY NOTES BELOW Laser Light is different from any other light sources with which you may be familiar. The light from this product can cause eye and skin injury if not set up and used properly. - Page 6 UNITY Lasers s.r.o. Elite Pro series Operational Manual (Revision 2022-10) LASER EMISSION DATA • Class 4 Laser Projector - Avoid Eye and Skin Exposure to Direct or Scattered Light! • This Laser Product is designated as Class 4 during all procedures of operation.
-
Page 7: Product Safety Label Location
UNITY Lasers s.r.o. Elite Pro series Operational Manual (Revision 2022-10) PRODUCT SAFETY LABEL LOCATION PRO 5 PRO 10 PRO 20 PRO 30 FRONT PANEL Aperture Label 2. Hazard Warning Symbol TOP PANEL 3. Aircraft Warning Label 4. Logotype Danger Label 5. -
Page 8: Product Safety Labels
UNITY Lasers s.r.o. Elite Pro series Operational Manual (Revision 2022-10) PRODUCT SAFETY LABELS Logotype Danger Label Diode Laser __ W MAX OUTPUT AT __ nm __ W MAX OUTPUT AT __ nm __ W MAX OUTPUT AT __ nm ___W AT ________nm... -
Page 9: Interlock Connection Diagram
UNITY Lasers s.r.o. Elite Pro series Operational Manual (Revision 2022-10) INTERLOCK CONNECTION DIAGRAM... -
Page 10: Instructions For Using E-Stop System
UNITY Lasers s.r.o. Elite Pro series Operational Manual (Revision 2022-10) INSTRUCTIONS FOR USING E-STOP SYSTEM Connect the E-stop box to the 3-pin interlock connector on the rear of the laser projector using a 3-PIN XLR cable. ** Note that the E-stop box has an available secondary interlock port. The secondary port is to be used to interface a secondary interlock device (e.x. -
Page 11: Theory Of Operation
UNITY Lasers s.r.o. Elite Pro series Operational Manual (Revision 2022-10) THEORY OF OPERATION “UNITY Laser projector” is supplied with “E-Stop Box” and “Remote Interlock Bypass” including one cable. If user doesn’t need additional “User E-Stop Switch”, “Remote Interlock Bypass” should be inserted into “Remote Interlock Connector”... -
Page 12: Operation
UNITY Lasers s.r.o. Elite Pro series Operational Manual (Revision 2022-10) Caution – use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. This Laser Product is designated as Class 4 during all procedures of operation. - Page 13 UNITY Lasers s.r.o. Elite Pro series Operational Manual (Revision 2022-10) INSTRUCTIONS FOR TURNING OFF THE LASER SYSTEM Turn off the key switch; and deactivate via the red mushroom switch on the E-stop box. You can remove the 3-pin Interlock bo too, if the laser will be kept for no use. (We recommend having a professional operator to keep the keys and 3-pin Interlock switch.)
-
Page 14: Safety Tests
UNITY Lasers s.r.o. Elite Pro series Operational Manual (Revision 2022-10) SAFETY TESTS E-STOP FUNCTION • With the projector operating and projecting laser light, press the red E-stop switch. The projector must shut off immediately. • Fully extend the red E-stop switch, until a yellow collar is visible on the switch system. The projector must not emit any laser light. -
Page 15: Model Specification
UNITY Lasers s.r.o. Elite Pro series Operational Manual (Revision 2022-10) MODEL SPECIFICATION Product specification (Elite 5 PRO) Type of laser: full-colour, semiconductor diode laser system Guaranteed optical output: > 5,000mW small to medium indoor / outdoor laser shows and laser... -
Page 16: Front & Rear Panel View (Elite 5 Pro)
UNITY Lasers s.r.o. Elite Pro series Operational Manual (Revision 2022-10) Front & Rear panel view (Elite 5 PRO) Name Function Laser output, do not look directly into this aperture. Laser Aperture Aperture masking Can be moved up and down when two locking bolts are loosened. -
Page 17: Dimension Details (Elite 5 Pro)
UNITY Lasers s.r.o. Elite Pro series Operational Manual (Revision 2022-10) Dimension details (Elite 5 PRO) -
Page 18: Product Specification (Elite 10 Pro)
UNITY Lasers s.r.o. Elite Pro series Operational Manual (Revision 2022-10) Product specification (Elite 10 PRO) Type of laser: full-colour, semiconductor diode laser system Guaranteed optical output: ≥ 11,000mW small to medium indoor / outdoor laser shows and laser Suitable for:... -
Page 19: Front & Rear Panel View (Elite 10 Pro)
UNITY Lasers s.r.o. Elite Pro series Operational Manual (Revision 2022-10) Front & Rear panel view (Elite 10 PRO) Name Function Laser output, do not look directly into this aperture. Laser Aperture Aperture masking Can be moved up and down when two locking bolts are loosened. -
Page 20: Dimension Details (Elite 10 Pro)
UNITY Lasers s.r.o. Elite Pro series Operational Manual (Revision 2022-10) Dimension details (Elite 10 PRO) 325,4... -
Page 21: Product Specification (Elite 20 Pro)
UNITY Lasers s.r.o. Elite Pro series Operational Manual (Revision 2022-10) Product specification (Elite 20 PRO) Type of laser: full-colour, semiconductor diode laser system Guaranteed optical output: 22,000mW medium to large sized indoor / outdoor laser shows and Suitable for: laser graphicdisplays... -
Page 22: Front & Rear Panel View (Elite 20 Pro)
UNITY Lasers s.r.o. Elite Pro series Operational Manual (Revision 2022-10) Front & Rear panel view (Elite 20 PRO) Name Function Laser Aperture Laser output, do not look directly into this aperture. Aperture masking Can be moved up and down when two locking bolts are loosened. -
Page 23: Dimension Details (Elite 20 Pro)
UNITY Lasers s.r.o. Elite Pro series Operational Manual (Revision 2022-10) Dimension details (Elite 20 PRO) 391,9... -
Page 24: Product Specification (Elite 30 Pro)
UNITY Lasers s.r.o. Elite Pro series Operational Manual (Revision 2022-10) Product specification (Elite 30 PRO) Type of laser: full-colour, semiconductor diode laser system Guaranteed optical output: ≥ 33,000mW large indoor / medium outdoor laser shows and laser Suitable for: graphic displays... -
Page 25: Front & Rear Panel View (Elite 30 Pro)
UNITY Lasers s.r.o. Elite Pro series Operational Manual (Revision 2022-10) Front & Rear panel view (Elite 30 PRO) Name Function Laser Aperture Laser output, do not look directly into this aperture. Aperture masking Can be moved up and down when two locking bolts are loosened. -
Page 26: Dimension Details (Elite 30 Pro)
UNITY Lasers s.r.o. Elite Pro series Operational Manual (Revision 2022-10) Dimension details (Elite 30 PRO) 317,5 414,4... -
Page 27: Ilda Pinout Specification
UNITY Lasers s.r.o. Elite Pro series Operational Manual (Revision 2022-10) ILDA PINOUT SPECIFICATION 14. X - 2. Y + 15. Y - 3. Intensity/Blanking + 16. Intensity/Blanking - 4. Interlock A 17. Interlock B 5. R + 18. R - 6. -
Page 28: Technical Information - Maintenance
UNITY Lasers s.r.o. Elite Pro series Operational Manual (Revision 2022-10) TECHNICAL INFORMATION - MAINTENANCE GENERAL CLEANING INSTRUCTIONS - TO BE DONE BY USER Due to fog residue, smoke, and dust cleaning the external body of the projector should be carried out periodically to optimize light output.
Need help?
Do you have a question about the ELITE 5 PRO and is the answer not in the manual?
Questions and answers