Table of Contents
Advertisement
Installing the Device
This chapter describes how to install the device, including mounting the device,
connecting power, and connecting the device to the network.
Radiation hazard – risk of serious personal injury
This product contains a laser system and is classified as a CLASS 1 LASER PRODUCT.
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
Electrocution hazard – risk of serious personal injury and/or damage to
equipment
Before performing any maintenance tasks, make sure all power to the device has
been disconnected and wait approximately two minutes for any remaining energy
to dissipate.
IMPORTANT
This product contains no user-serviceable parts. Attempted service by unauthorized
personnel shall render all warranties null and void.
Changes or modifications not expressly approved by Siemens AG could invalidate
specifications, test results, and agency approvals, and void the user's authority to
operate the equipment.
IMPORTANT
This product should be installed in a restricted access location where access can only
be gained by authorized personnel who have been informed of the restrictions and
any precautions that must be taken. Access must only be possible through the use
of a tool, lock and key, or other means of security, and controlled by the authority
responsible for the location.
2.1
Unpacking the Device
When unpacking the device, do the following:
1.
2.
3.
RUGGEDCOM M969
Installation Manual, 01/2021, C79000-G8976-1039-03
WARNING
DANGER
Inspect the package for damage before opening it.
Visually inspect each item in the package for any physical damage.
Verify all items are included.
2
9
Advertisement
Table of Contents
