Modifying The Order Of Fcs Switches; Fcs Policy Distribution - Brocade Communications Systems 53-1001763-02 Administrator's Manual

Brocade communications systems iron user manual
Table of Contents

Advertisement

NOTE
FCS policy must be consistent across the fabric. If the policy is inconsistent in the fabric, then you
will not be able to perform any fabric-wide configurations from the primary FCS.

Modifying the order of FCS switches

1. Log in to the Primary FCS switch using an account assigned to the admin role.
2. Type secPolicyShow "Defined", "FCS_POLICY".
3. Type secPolicyFCSMove; then provide the current position of the switch in the list and the
4. Type the secPolicyActivate command to activate and save the new order.

FCS policy distribution

The FCS policy can be automatically distributed using the fddCfg
be manually distributed to the switches using the distribute -p command. Each switch that receives
the FCS policy must be configured to receive the policy. To configure the switch to accept
distribution of the FCS policy, refer to
Database distributions may be initiated from only the Primary FCS switch. FCS policy configuration
and management is performed using the command line or a manageability interface.
Fabric OS Administrator's Guide
53-1001763-02
This displays the WWNs of the current Primary FCS switch and backup FCS switches.
desired position at the prompts.
Alternatively, enter secPolicyFCSMove [From, To] command. From is the current position in the
list of the FCS switch and To is the desired position in the list for this switch.
Example of moving an FCS policy
The following example moves a backup FCS switch from position 2 to position 3 in the FCS list,
using interactive mode:
primaryfcs:admin> secpolicyfcsmove
PosPrimary WWN
=================================================
1Yes
10:00:00:60:69:10:02:181
2No
10:00:00:60:69:00:00:5a2
3No
10:00:00:60:69:00:00:133
Please enter position you'd like to move from : (1..3) [1] 2
Please enter position you'd like to move to : (1..3) [1] 3
____________________________________________________
DEFINED POLICY SET
FCS_POLICY
PosPrimaryWWN
__________________________________________________
1Yes
10:00:00:60:69:10:02:181 switch5.
2No
10:00:00:60:69:00:00:133 switch73.
3No
10:00:00:60:69:00:00:5a2 switch60.
____________________________________________________
DId
swName.
switch5.
switch60.
switch73.
DId swName
"Database distribution settings"
FCS policies
fabwideset command or it can
--
on page 159.
7
139

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents