Table of Contents
Advertisement
12
Deleting a TI zone
Deleting a TI zone
Use the zone
deletes the entire zone; to only remove port members from a TI zone, use the zone
command, as described in
1. Connect to the switch and log in as admin.
2. Enter the zone
3. Enter the cfgEnable command to reactivate your current effective configuration and enforce
Example of deleting a TI zone
To delete the TI zone bluezone, type:
Remember that your changes are not enforced until you enter the cfgEnable command.
Displaying TI zones
Use the zone
following information for each zone:
•
•
•
•
•
If you enter the cfgShow command to display information about all zones, the TI zones appear in
the defined zone configuration only and do not appear in the effective zone configuration.
1. Connect to the switch and log in as admin.
2. Enter the zone
286
delete command to delete a TI zone from the defined configuration. This command
--
"Modifying TI zones"
delete command.
--
zone --delete name
You can delete multiple zones by separating the zone names with a semicolon and enclosing
them in quotation marks.
the TI zones.
cfgenable "current_effective_configuration"
switch:admin> zone --delete bluezone
show command to display information about TI zones. This command displays the
--
zone name
E_Port members
N_Port members
configured status (the latest status, which may or may not have been activated by cfgEnable)
enabled status (the status that has been activated by cfgEnable)
show command.
--
zone --show [ name ] [-ascending]
To display information about the TI zone purplezone:
switch:admin> zone --show purplezone
Defined TI zone configuration:
TI Zone Name:
redzone:
Port List:
1,2; 1,3; 3,3; 4,5
Configured Status: Activated / Failover-Enabled
Enabled Status: Activated / Failover-Enabled
on page 284.
Fabric OS Administrator's Guide
remove
--
53-1001763-02
Hide quick links:
Advertisement
Table of Contents
