Port Configuration; Table 24 Port Information - Brocade Communications Systems 53-1001763-02 Administrator's Manual

6
Ports and applications used by switches
TABLE 23
Devices
Switch access
Zoning

Port configuration

Table 24
various policies, take into consideration firewalls and other devices that may sit between switches
in the fabric and your network or between the managers and the switch.
TABLE 24
Port
22
23
80
111
123
161
443
512
513
514
897
132
Access defaults (Continued)
Access default
All devices can access the management server.
Any device can connect to any FC port in the fabric.
Any switch can join the fabric.
All switches in the fabric can be accessed through a serial port.
No zoning is enabled.
provides information on ports that the switch uses. When configuring the switch for
Port information
Type Common use
TCP SSH, SCP
TCP Telnet
TCP HTTP
UDP sunrpc
UDP NTP
UDP SNMP
TCP HTTPS
TCP exec
TCP login
TCP shell
TCP
Comment
Use the ipfilter command to block the port.
Use the ipfilter command to block the port.
This port is used by Platform API. Use the ipfilter command to
block the port.
Disable the SNMP service on the remote host if you do not use it,
or filter incoming UDP packets going to this port.
Use the ipfilter command to block the port.
This port is used by the Platform API.
Fabric OS Administrator's Guide
53-1001763-02